The length of the air pulse for marking essentially determines the diameter of the color dot as well as the number of possible markings per cartridge.
Our experiences with different manufacturers of screwdriving systems have shown that in some cases considerable fluctuations occur with the pulse lengths and therefore in the marking results.
The amount of programming, that is to say, setting in the existing controls for a signal length to be used for the SICOPOINT 9000 labeling system is often very high.
To reduce the costs for setting the SICOPOINT 9000 labeling system to a minimum, we remind you to use our timer element VARIO PULSE.
The timer has a linearity of +/- 1%
The timer control can be done either by a 24V / AC voltage signal or by a potential-free signal. To control the timer with a potential-free signal, there must be a constant voltage supply of 220V / AC to the timer. The cartridge in horizontal position using limited extensions (length 200 mm.)
The advantage of the external timer VARIO PULSE lies in the simple adjustment and therefore in the adjustment of the size of the color point.
Maintenance personnel will have no problem with the simple help of a potentiometer directly on the timer.
The advantages of the VARIO PULSE timer are in the easy handling and high flexibility, as well as avoiding high costs of programming in the controls.